PN2000-PN2000 Portal Type Rewinding Machine 

1.Use: this unit is suitable for rewinding wires and cables.

2. Main Component

2.1	2500mm portal pay-off rack	1 set
2.2	# guide line rack	1 pc
2.3	TQD1600 Pneumatic caterpillar	1 set
2.4	# guide line rack	1 pc
2.5	2500mm portal take-up rack	1 set
2.6	Electrical control system	1 set

3.1 2500mm portal pay-off rack

3.1.1 Adopt bobbin size：PN1250-PN2500

3.1.2 Bobbin width：1180-1900

3.1.3 Max loading capacity：12t

3.1.4 Pay-off form：passive

3.1.5 Tension form：Friction tension adjustment

3.1.6 Beam is made of seamless steel pipe finishing

3.1.7 Q235-A steel plate of column bottom beam is welded, with large bearing capacity and good rigidity after aging treatment

3.1.8 Cable reel lifting can be lifted or lifted separately or simultaneously, and equipped with mechanical and electrical protection

3.1.9 Action performance: set out in alignment, line arrangement is uniform, the receiving speed is synchronized with the production line speed, and the setting out speed is automatically tracked.

3.1.10 The electric configuration is set out in passive mode, and the upper computer provides traction force. The gap type signal line is adopted. Low voltage electrical components adopt domestic famous brands.

3.2 TQD1600 Pneumatic caterpillar

3.2.1 Cylinder logarithm:6 pairs

3.2.2 Motor power:7.5KW（AC）

3.2.3 Max traction force:1600kg

3.2.4 Max traction speed       50m/min

3.2.5 Max through wire diameter:80mm

3.2.6. Meter counting function in it

3.2.7. Structure and characteristics: the crawler type pneumatic tractor is adopted, which is pneumatically tightened to loosen the cable, pneumatically tensioned to the crawler, driven by different motors, infinitely variable speed and equipped with air brake. The whole braking process is completed by motor frequency converter, air brake system and brake resistance through the overall coordinated control of PLC, with consistent braking, high structural strength and convenient operation.

3.2.8. The tractor is driven by 7.5kW variable frequency motor, and the tractor is operated by man-machine interface. PLC is used to coordinate and control the tractor and match the operation of the whole unit.

3.2.9. Meter counting function: the tractor has built-in electronic meter counter, the meter can be displayed in the man-machine interface, and has the function of stopping at meter, that is, input the required meter in the man-machine interface, when the meter value reaches the input value, the whole machine will stop automatically and prompt in the man-machine interface