300/1+18 Tubular Closer With In-line Stretching

Application: Bare Cu,Al, Steel wire

Warranty Time: 12 months.

Delivery time: 90 days.

Payment term: 30% by T/T, 70% before delivery time.

Driving form: Shaft type or separate motor

Motor brand: Siemens, WNM.

Bearing brand: NSK,HRB,SKF,etc

Inverter: INOVANCE

Product Detail
Parameters
Components
Details

300/1+18 Tubular Closer With In-line Stretching.

1. Use:

The machine is mainly used for stranding 18 wire steel wires. The appearance of the unit is a national patent design, which improves the safety protection level, operates stably at high speed and effectively reduces the operation noise. The unit adopts electromagnetic tension to provide setting out tension. The tension output is more uniform and the operation is convenient. The whole machine adopts touch screen operation, PLC unified coordination and management, and the electric control system is advanced.

2.1	Single wire diameter	φ0.5mm-φ1.0mm
2.2	Max strand diameter	φ7.0mm
2.3	Through line hole diameter	≥φ10mm
2.4	Strand pitch range	15.46mm-119.49mm（customer standard）
2.5	Cage max rotation speed	1000r/min
2.6	Cage max rotation speed with load	800r/min（50Hz）
2.7	Traction line speed range	15.46-119.49m/min（customer standard is what?）
2.8	Traction wheel diameter	φ800+φ800mm
2.9	Bobbin size in cage	φ300×φ33×228mm
2.10	Pay-off bobbin	φ800mm
2.11	Take-up bobbin size	φ1000mm(customer standard)
2.12	Main motor power	45KW（AC）

3.1	800mm Central pay-off frame	1 set
3.2	18 bobbins strand cage	1 set
3.3	parallel die holder and Straightening device	1 set
3.4	Ø800+Ø800 double traction device	1 set
3.5	Φ1000 end shaft type take-up and traverse frame	1 set
3.6	Electrical control system	1 set
3.7	Safety protecting system	1 set

4.7.1	Power supply: three-phase five wire system, 380V (± 10%), 50Hz
4.7.2	The electric control part is composed of operation cabinet, touch screen, etc. the electric cabinet has good mechanical performance and dust-proof design, and is equipped with proper amount of vent
4.7.3	Installation power：55kw
4.7.4	Motor protection function: the design of electrical control circuit includes: phase loss, overload, overheat protection function to prevent motor damage
4.7.5	The alarm fault information can be queried on the touch screen, with the function of alarm fault storage, and the historical operation information can be set to be deleted only by the personnel with management authority
4.7.6	All drive motors are designed with encoder, and the encoder feedback is operated in the closed-loop control system
4.7.7	The unit uses PLC to coordinate and control the operation. Touch screen human-machine interface operation is adopted. Simple and convenient operation
4.7.8	Others: on the operation side of the 18-bobbin barrel shield, there are inching and emergency stop buttons for the whole machine at the incoming end; on the middle, there are opening, closing, inching and emergency stop buttons for the shield; on the outgoing end, there are opening, closing, inching and emergency stop buttons for the shield