2.1

Single insulated external diameter

Ø 5.0-Ф12mm

2.2

Max lay-up external diameter

Ø 30mm

2.3

Max Strand bow rotation speed

180r/min

2.4

Stranding pitch

201～1531mm

2.5

Taping machine speed

650m/min

2.6

Traction line speed

245m/min

2.7

Capstan wheel diameter

Ø 1600mm×2

2.8

Pay-off bobbin size in cage

PN1000

2.9

Center Pay-off bobbin size range

PN1000

2.10

Take-up bobbin size range

PN1600

2.11

Main motor power

45kw（AC）

2.12

Taping motor power

11Kw(AC)

2.13

Capstan motor power

45kw（AC）

2.14

Take-up motor power

4.0KW(AC)

2.15

Machine center high

1000mm

3.1

Ø 1000 central pay-off

1 set

3.2

1000/5 bobbin strand cage

1 set

3.3

Assembling die holder

1 set

3.4

Ø600 × 2 double reel non-metallic taping machine

1 set

3.5

Meter counter

1 set

3.6

Ø1600mm double wheel capstan

1 set

3.7

1600mm Portal type take-up and arrange line frame

1 set

3.8

Electrical control system

1 set

3.9

safety cover

1 set

4.2.1

Pay-off bobbin size in cage

PN1000

4.1.2

Single wire through hole diameter

Ø 16mm

4.1.3

Max rotation speed

180r/min

4.1.6

Main cage motor power

45KW (AC variable frequency motor)

4.2.5 The cradle adopts end shaft type manual clamping and loosening reel, with mechanical locking and retraction mechanism. Steel plate welding, CNC cutting of plates, firm welding, overall annealing of the cradle to improve the mechanical strength, overall boring to ensure concentricity, and bearing support at both ends.

4.2.6 Pay off tension is controlled by wheel belt friction, and the tension is manually adjusted after shutdown, which is easy to operate.

4.2.7 The leading out end of the cradle frame is provided with upper and lower adjustable guide wheels, and guide cylinders are added on the left and right to ensure smooth running of the cable core. Not easy to scratch,

4.2.8 The stranding bow is made of special steel, with high-speed operation, no fracture, safety and stability.

4.2.9 The winch cage is installed on 6 groups of independent bearing seats, and the bearing seat is installed on the integral welding base. The winch cage is driven by AC variable-frequency motor. The winch body is driven by through shaft linkage and driven by multiple toothed belts. Each section of winch bow is linked respectively. It has high synchronization and low noise. It can be braked in sections at the same time. The pneumatic disc brake is adopted, and the braking is sensitive.

4.2.10 The front end of the main machine is equipped with a filling frame, and the number of hemp balls is 6 (size of hemp ball: Φ 200mm) × 300mm length)

4.2.11 The distribution board shall be equipped with "throwing block" broken line parking device.

4.2.12 The strapping cage adopts a fully enclosed, push-pull protective cover. The protective cover is interlocked with the electrical appliances of the unit. It can be started only after the protective cover is closed, which can effectively improve the safety level. Built in lighting working light, beautiful appearance, large disc change space and safe operation